Inficon T-Guard Leak Detection Sensor Manuel d'utilisateur télécharger pdf (Page 12)

10 Description

jina85e 3.fm Technical Handbook(1112)

3.2 Interfaces

The T-Guard™ Leak Detection Sensor has 5 interfaces for control and information

exchange.

Power Connector

Only two of the four pins are used for the power supply. The plus pole is marked with

„1+“, the minus pole is marked with „2-“.

Fuse

The fuse reacts to reverse polarity and a current exceeding 7 A.

Fig. 4-3

Item Description Item Description

1 Power supply connector 5 PLC-interface

2 Fuse 6 RS232 PC-interface

3 Interface for the control unit 7 Analog Recorder Output

4 I•Stick -connector 8 Status LEDs

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 84 85

T-Guard™ 1
1 Operating instructions 4 3
2 Safety 7 3
3 Description 9 3
4 Installation 29 3
2 Content 4
5 Operation 39 4
6 Maintenance 66 4
7 Product Handling 71 4
8 Technical Data 72 4
9 Errors and Warnings 74 5
1 Operating instructions 6
1.3 Graphic conventions 7
1.4 Glossary 7
6 Operating instructions 8
2 Safety 9
8 Safety 10
3 Description 11
3.2 Interfaces 12
Description 11 13
12 Description 14
3.3 Vacuum diagram 15
14 Description 16
TANDBY mode 17
16 Description 18
18 Description 20
3.4 Wise Technology™ Sensor 21
3.5 Accessories 22
SC-button) 23
22 Description 24
3.5.2 19" control unit 25
3.5.4 Connector set 26
3.5.5 Fore Pump 26
3.5.6 2m line 27
3.5.7 I•Stick 27
3.6 Scope of delivery 28
3.7 Ordering Information 29
28 Description 30
4 Installation 31
4.3 Choosing a Fore Pump 32
4.4 Installing Electrically 33
4.6 Connecting a PLC 34
Installation 33 35
34 Installation 36
Installation 35 37
36 Installation 38
Installation 37 39
4.7 Connecting a PC 40
5 Operation 41
40 Operation 42
5.2 Calibrating 43
5.2.2 Start Calibration 44
5.3 Measuring 45
44 Operation 46
Operation 45 47
5.3.2 Carrier Gas Mode 48
Operation 47 49
1 Helium signal 4 Time 49
2 Start 5 Rising signal 49
48 Operation 50
5.3.3 Continuous Mode 51
5.3.4 Switching Off 52
5.3.5 Standby 52
5.3.6 Helium contamination 52
5.4 Controlling via PLC 53
5.5 Controlling via RS-232 53
52 Operation 54
Operation 53 55
5.8 Settings 56
Menu Structure T-Guard™ 57
56 Operation 58
Operation 57 59
58 Operation 60
Operation 59 61
60 Operation 62
Operation 61 63
62 Operation 64
Operation 63 65
64 Operation 66
Operation 65 67
6 Maintenance 68
6.2 Replacing Hoses 69
68 Maintenance 70
Remove 4 screws from the top 71
70 Maintenance 72
7 Product Handling 73
8 Technical Data 74
8.4 Environmental Conditions 75
9 Errors and Warnings 76
76 Errors and Warnings 78
10 Service Centers World Wide 80
Service Centers World Wide 79 81
10.1 Ordering Information 82
Service Centers World Wide 81 83
Dokument: jina85e1-f (1112) 85

Commentaires sur ces manuels

Pas de commentaire

Inficon T-Guard Leak Detection Sensor Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Inficon T-Guard Leak Detection Sensor