Inficon Hydrostik Hydrogen Fuel Cylinder Installation Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Inficon Hydrostik Hydrogen Fuel Cylinder Installation. INFICON Hydrostik Hydrogen Fuel Cylinder Installation User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 7
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
INSTRUCTION SHEET
Hydrostik Hydrogen Fuel Cylinder
Installation Instructions
PN 074-626-P1A
1 of 7
Introduction
Hydrostik™ is a metal hydride hydrogen fuel cylinder that is used as a source of
hydrogen gas in a DataFID™ or MicroFID II™. Hydrostik releases hydrogen at low
pressure to support up to ten hours of instrument operation.
The following installation instructions are provided:
attaching Hydrostik to the Hydrostik adapter
filling Hydrostik using a high-pressure hydrogen tank
installing Hydrostik adapter assembly into a DataFID or MicroFID II
NOTE: These procedures are applicable to both DataFID and MicroFID II.
Hydrostik Related Parts
Hydrostik (PN ISP-951-402-P1 or PN ISP-951-402-P2)
Hydrostik Adapter (PN 951-205-G1)
Foam Insert (PN ISP-951-202-G1)
Attach Hydrostik to the Hydrostik Adapter
NOTE: In order to fill Hydrostik with hydrogen, it must be attached to the
Hydrostik adapter.
Insert the threaded end of Hydrostik into the Hydrostik adapter and screw
Hydrostik clockwise until tight (Figure 1).
Figure 1 Attaching Hydrostik to the Hydrostik Adapter
Hydrostik adapter Hydrostik
Vue de la page 0
1 2 3 4 5 6 7

Résumé du contenu

Page 1 - INSTRUCTION SHEET

INSTRUCTION SHEETHydrostik Hydrogen Fuel CylinderInstallation InstructionsPN 074-626-P1A1 of 7IntroductionHydrostik™ is a metal hydride hydrogen fuel

Page 2

INSTRUCTION SHEETHydrostik Hydrogen Fuel CylinderInstallation InstructionsPN 074-626-P1A2 of 7Fill Hydrostik with HydrogenHydrostik must be filled wi

Page 3

INSTRUCTION SHEETHydrostik Hydrogen Fuel CylinderInstallation InstructionsPN 074-626-P1A3 of 7WARNINGDo not use an open flame to test for leaks!1 Con

Page 4

INSTRUCTION SHEETHydrostik Hydrogen Fuel CylinderInstallation InstructionsPN 074-626-P1A4 of 74 Attach the Hydrostik adapter assembly to the hydrogen

Page 5

INSTRUCTION SHEETHydrostik Hydrogen Fuel CylinderInstallation InstructionsPN 074-626-P1A5 of 710 Wait five seconds, then turn the filling station val

Page 6

INSTRUCTION SHEETHydrostik Hydrogen Fuel CylinderInstallation InstructionsPN 074-626-P1A6 of 7Install the Filled Hydrostik into the FIDThe Hydrostik

Page 7

INSTRUCTION SHEETHydrostik Hydrogen Fuel CylinderInstallation InstructionsPN 074-626-P1A7 of 7©2014 INFICONwww.inficon.com [email protected]

Commentaires sur ces manuels

Pas de commentaire